Checked outlet have 120v, checked power at board and have the 120v at board, checked all thermal fuses all have continuity and check good, checked main noise filter fuse and all is good one plug was loose on noise filter tightened down and all is working and heating good.

Unit 112: Ran dishwasher through service mode, no error codes all is heating good and all amps and ohms going to components are right in specs, heating element tests at 9.3 amp draw during heat cycle would not install any parts at this time.

Ran through service mode all is draining good if problem returns will need drain pump.

Customers hinge was rusted out went ahead and cleaned out hinge and made sure it unlocked and locked the door unit operating with in specs

Dryer was not heating so took apart and tested everything and heating element was bad. While having it apart I also installed a maintenance kit because the wheels were all wrapped up in hair and lint and one was falling apart. Dryer is heating without issues.