Complaint of no bake and intermittent no light of right front burner. Right front ignition switch not igniting consistently like other burners. Quote for burner repair on separate work order. Unit has two bake igniters and only 1 ignites at just 2.8 amps. Confirmed 120 VAC to dead igniter. Needs both igniters. One is completely open other is not pulling proper amperage to function properly. Replaced both igniters. Tested via 300 degree bake and unit tested good.

Complaint of noise during use, found sticking idler pulley, replaced all rollers and idler with repair kit. Replaced belt with whirlpool oversized drum belt. Tested unit and unit tested good.

Complaint of no drain. Pump runs. Cleared out drain sump. Tested unit and unit tested good.

Completed short run vent cleaning all is clean and attached and venting good.

Customer unit had no power going to went ahead and did a soft reset and and plugged the wires and put them back on and was able to get the unit to turn on also did a software update on the unit seems to be working with in specs complete