Gear case leaking oil and water from bearings going bad gearcase will need to be replaced.

Customer complaint was that the unit would be making a weird noise before starting a cycle could not replicate any issue while on site also went into service mode and did not see any stored error codes and everything was working fine If issue happens again inform customer to monitor unit and take if video of issue if it happens again then we can take it from there sounds to me it could be possible door switch MOD:WTW5105hwo

Customer door was off of the hinge needed to put door back on unit is operating with in specs

Checked thermostat and all is checking good temperatures at vent in refrigerator are 8? and dropping checked frost pattern in freezer all is normal, checked defrost heater all is working and heating good. Thermometer that customer has in refrigerator is reading 53? after 20 minutes taped to vent.

Checked and cleaned all wheels checked blower housing and bearings in upper housing are going bad was able to get some lube on it and all is quiet for now part needed is upper blower housing: (NLA) No part of moving this dryer had and contribution to this bearing going bad it's normal wear.