We serviced a
Ge Stove
Near Pittsford, NY 14534
Derek
Job Details:
12/03/2024
Needs a new cook top
We serviced a
LG Refrigerator
Near Fairport, NY 14450
Derek
Job Details:
12/03/2024
I found a pinched wire at the main computer board. It was clamped into the back cover and when the doors were opened and closed it would sometimes shut the entire fridge off. I fixed the wires and I routed them into the plastic holders built into the mother board housing. I tested it and it?s working good now.
We serviced a
electrolux Washer
Near Fairport, NY 14450
Jose R
Job Details:
12/03/2024
Replaced gasket due to old one having mold on after replacing unit ran a cycle confirmed no leaks now unit is operating with in specs complete
We serviced a
GE Dishwasher
Near Penfield, NY 14526
Chris
Job Details:
12/03/2024
Vent cap on inner door was loose - tightened and unable to locate any other leaks
If problem returns recommend replacing vent
Est is approximately 230.00 plus tax due on return to replace/ no farther repair at this time
We serviced a
Maytag Washer
Near Ontario, NY 14519
Chris
Job Details:
12/03/2024
Needs at least gearbox , may not be able to get agitator off and may be an additional cost
Estimate approx 370-500 plus tax would be due
No repair at this time
We serviced a
LG Dryer
Near Rochester, NY 14609
Jose D
Job Details:
12/03/2024
Te1 error code on site. All the fuses and thermister passed continuity and k-ohms test. The heating element is good, and there are no lint clogs on the vent. The main board is faulty and will need to be replaced.
We serviced a
maytag dryer
Near West Henrietta, NY 14586
JK
Job Details:
12/03/2024
Dryer plug is alittle loose causing contact issues, thermal fuse wire was loose retighten all and all is running good, dishwasher mounting board came unglued reattached with screws all is solid and stable.
We serviced a
GE Oven
Near Penfield, NY 14526
Tina
Job Details:
12/03/2024
Broil on upper oven isn?t working, the element has a burn mark in it and I checked to make sure it was getting voltage and it has 240VAC going to it so a new broil element is needed
12/3 installed broil element and it?s heating without issues.
We serviced a
GE Dryer
Near Irondequoit, NY 14609
Cristian
Job Details:
12/03/2024
if customer calls back for the repair will recommend control board with motor to be safe
We serviced a
samsung refrigerator
Near Fairport, NY 14450
Tina
Job Details:
12/03/2024
Installed new dispenser and it?s working without issues
We serviced a
Ge oven
Near Rochester, NY 14612
Jose D
Job Details:
12/03/2024
The oven is not heating on site. Both the elements passed the continuity test, but are not getting the correct voltage. The main board is faulty, and will need to be replaced.
We serviced a
Smausng refrigerator
Near Fairport, NY 14450
Cristian
Job Details:
12/03/2024
Seal system issue low on refrigerator
We serviced a
Whirlpool Dishwasher
Near Webster, NY 14580
Cristian
Job Details:
12/03/2024
Ran a full diagnostic on the dishwasher didn?t see no issues. Did explain to customer to use rinse aid and also run the sink so you get 120? going into the dishwasher.
We serviced a
Maytag Washer
Near Fairport, NY 14450
Tina
Job Details:
12/03/2024
washer has a low fill error code but the washer is filling without issues to start then during cycle board sends voltage to it randomly and the board is reading the cold is attached to the warm and Vice versa but it?s connected right. i also unhooked water lines and the filters are very dirty and would not come out to be cleaned. customer was quoted on board, inlet valve and was also suggested to get stainless braided water lines.
customer is going to get a new machine due to repair cost and age of appliance.
We serviced a
Bosch dishwasher
Near Fairport, NY 14450
Tina
Job Details:
12/03/2024
Uninstalled circulation pump and put back in and no leaking detected ran for a bit and no error code. Putting putting number in notes if they get the error code again please order part number in notes due to leaking must be slow from pump.
We serviced a
Samsung Dryer
Near Irondequoit, NY 14609
Jose D
Job Details:
12/03/2024
Vibration/ bearing sound on site. The noise the customer pointed out seems to be coming from the motor, since that's where the sound is the loudest. After putting the dryer back together, the noise then went away. Possible issue with the motor. I double checked all componants within the dryer, and tightened every screw. Advised the customer if the noise comes back, and is at its loudest near the front bottom left corner, then it's a motor issue. Did everything I could to ensure it's not a frame vibration issue.
We serviced a
Frigidaire Refrigerator
Near Rochester, NY 14624
JK
Job Details:
12/03/2024
Ran water dispenser checked all water lines can find no leaks ran icemaker and can find no leaks checked evap pan for cracks can find no cracks or leaks. Instructed customer to monitor and call if needed.
We serviced a
Maytag Stove
Near Hilton, NY 14468
Jose D
Job Details:
12/03/2024
The stove top glass is cracked.
We serviced a
Maytag washer
Near Rochester, NY 14609
Jose D
Job Details:
12/03/2024
I inspected the drain pump, and found no debri or any objects obstructing the drain pump. The drain pump propellers has a good spring back when manually rotating it. Ran a full quick wash cycle, and the wash stopped at 29 minutes and would no continue. Gave an error for the drain pump, and an error for switch water line...but both are working and correct. The washer need a new wire harness, there is a short in the wiring that controls the drain pump, the wire harness did not correct the issue.
We serviced a
Whirlpool Refrigerator
Near Webster, NY 14580
Chris
Job Details:
12/03/2024
Damper is closed apon arrival - was able to get damper opening
Customer to monitor - estimate is approx 220.00 plus tax and shipping would be due on return
No farther repair at this time
We serviced a
Samsung Dryer
Near Rochester, NY 14626
Cristian
Job Details:
12/03/2024
Will recommend control board #DC92-01729V part is discontinued customer going to call Samsung to see if they got the parts
We serviced a
KEnmore Microwave
Near Fairport, NY 14450
Jose R
Job Details:
12/03/2024
Cx main board on the microwave is burnt out causing the unit to have no power would need control board for repair
We serviced a
Ge refrigerator
Near Fairport, NY 14450
Derek
Job Details:
12/03/2024
There was a huge block of ice frozen I. The bottom of the freezer. It took a long time to get it out so that I could get to the back panel and check the drain hose. The drain hose was blocked. I got it cleaned out and made sure the water was draining.
We serviced a
magic chef Washer
Near Rochester, NY 14625
Chris
Job Details:
12/03/2024
Needs new drain pump housing / cap assy but manufacturer does not support replacement parts for this unit and we are unable to source and cannot repair
We serviced a
Ge Washer
Near Penfield, NY 14526
Cristian
Job Details:
12/03/2024
Off-balance error codes will recommend to replace shocks and take it off the wooden pallet to have it properly leveled
We serviced a
Frigidaire Range
Near Palmyra, NY 14522
Derek
Job Details:
12/03/2024
Needs the spark modules for the burned knobs. I removed the top of the oven and replaced the harness and spark modules for the burners. I reassembled and tested it?s working great now. All burners lite perfectly.
We serviced a
Frigidiare Refrigerator
Near Pittsford, NY 14534
Tina
Job Details:
12/03/2024
SYEF error code which is a evap fan so I tested for voltage and it?s getting 12VDC so a new fan was installed, the door switch is also broken and only registering as closed so a new one is being ordered. Going to close the ticket out and will come back to install door switch.
We serviced a
Whirlpool Dishwasher
Near Penfield, NY 14526
Chris
Job Details:
12/02/2024
Appears lower spray arm is separated and causing water to surge out bottom of door - customer to order / repair themselves
No repair at this time
We serviced a
Kenmore refrigerator
Near Pittsford, NY 14534
JK
Job Details:
12/02/2024
Main PCB relay burnt out and will not allow unit to run, will need to replace main PCB
We serviced a
LG wahser
Near Rochester, NY 14618
Jose D
Job Details:
12/02/2024
Standing water on site. The washer is not draining and the drain pump sounds damaged. The drain pump is faulty and will need to be replaced. I repalced the drain pump, ran and tested, the washer now drains and is working properly. Ran a full rinse and spin cycle, and the washer finished with no issues.
We serviced a
Samsung Dishwasher
Near Rochester, NY 14620
Jose D
Job Details:
12/02/2024
Customer stated he got the lc error code. Leak detection. I'm able to see a lot of dry water calcium building on the wash motor, and directly underneath the wash motor. After running and testing the dishwasher, I was able to confirm, no leaks are coming from the drain pump, or the inlet water valve. I'm not seeing any leaks on site, but based on the water trails, it showing that it's coming from the sump motor assembly.
We serviced a
GE Refrigeerator
Near Penfield, NY 14526
Chris
Job Details:
12/02/2024
Replaced icemaker and verified harvest
Charge part only per Andrew
We serviced a
Whilrpool refrigerator
Near Rochester, NY 14622
Jose R
Job Details:
12/02/2024
Cx has a bad compressor fans are all spinning and compressor is running but the unit does not have a single frost pattern Cx will have to start exploring there options on a new one complete
We serviced a
Whirlpool Dryer
Near Rochester, NY 14624
JK
Job Details:
12/02/2024
Dryer will need timer and start switch customer will replace unit.
We serviced a
Amana Refrigerator
Near Fairport, NY 14450
Tina
Job Details:
12/02/2024
New thermostat was installed and the reservoir is being ordered due to the old one being cracked.
refrigerator is not freezing since installing new thermostat and the new reservoir was installed and everything is working without issues.
invoice is being emailed to Dave and he is going to be paying later today
We serviced a
Kenmore refrigerator
Near Fairport, NY 14450
Jose R
Job Details:
12/02/2024
Cx has a bad ice maker and would need to be replaced and will get back to us if wanting to go along with repair
We serviced a
Frigidaire Refrigerator
Near Webster, NY 14580
Chris
Job Details:
12/02/2024
Replaced electronics and unable to locate any other issues
We serviced a
maytag dishwasher
Near Irondequoit, NY 14609
Cristian
Job Details:
12/02/2024
Replace top Adjuster support
We serviced a
Bosch Dryer
Near Walworth, NY 14568
Tina
Job Details:
12/02/2024
Dryer makes a very loud running noise when spinning. I took apart and the front bearing part is needed but the part is NLA due to dryer being from 2005 customer is going to get a new appliance.
We serviced a
Thermador Oven
Near Rochester, NY 14618
Chris
Job Details:
12/02/2024
Replaced oven selector switch
We serviced a
Frigidaire Dishwasher
Near Rochester, NY 14618
Jose R
Job Details:
12/02/2024
Was running cycles to try to find a leak at the last min seen the drips coming from the door when opening up the dishwasher seen the bottom gasket torn if wants any repair done would need full door replacement that?s the only thing showing available
We serviced a
samsung washer
Near Pittsford, NY 14534
Tina
Job Details:
12/02/2024
washer needs new bearings, when in spin the metal on metal sounds sounds off kinda low but the fast it spins the louder it gets and sounds like an airplane taking off. customer is going to call samsung due to this being less than 2 years old.
We serviced a
Whirlpool Dryer
Near Webster, NY 14580
Chris
Job Details:
12/02/2024
Checked dryer and vent cleaned minimal lint and unable to locate any significant issues
We serviced a
Frigidaire Refrigerator
Near Webster, NY 14580
Chris
Job Details:
12/02/2024
Insulation is starting to fail behind icemaker and rear of the unit - this is non repairable and we are not able to repair.
We serviced a
Whirlpool Dryer
Near Rochester, NY 14622
Cristian
Job Details:
12/02/2024
Repalce gas coils #tests unit heating normal now
We serviced a
Kitchenaid Dishwasher
Near Rochester, NY 14620
Jose D
Job Details:
12/02/2024
Not finding any mechanical issues on site. The dishwasher is filling, washing and draining. Advised to run the hot water from the sink to guarantee the dishwasher is getting the hottest water. The wash motor could be on its way out, since the pressure doesn't seem that strong, but I can still hear the wash cycle.
We serviced a
Samsung refrigerator
Near Fairport, NY 14450
Derek
Job Details:
12/02/2024
Going to look at new fridge.
We serviced a
frigidaire Stove
Near East Rochester, NY 14445
Derek
Job Details:
12/02/2024
Needs power cord it?s melted and the power block for the cord on the back of the oven. Replaced these parts and tested it?s working good.
We serviced a
LG dishwasher
Near Fairport, NY 14450
Tina
Job Details:
12/02/2024
Dishwasher will still run and completes a full cycle but the UI will flash and beep the entire time while running. There is no damage to machine just the electrical issue.
Customer is going to call LG to see if they will cover fix and if not they will decide if they want to fix this one or get a new one. Part Number will be in notes.
We serviced a
maytag dishwasher
Near Fairport, NY 14450
Derek
Job Details:
12/02/2024
It has 5 different error codes all points to the main control board. She?s going to look at new dishwashers.
We serviced a
Ge washer
Near Fairport, NY 14450
JK
Job Details:
12/02/2024
Ran washer through service mode no stored error codes, all checks good, ran through a calibration mode and then a normal fill and wash cycle all is filling and running good. Checked pressure sensor and tube all is working good all connections on machine are tight and in good working order. Start button was sticking due to detergent buildup cleaned all and all is working good
We serviced a
LG Dishwasher
Near Macedon, NY 14502
Tina
Job Details:
12/02/2024
L2 is a rinse aid code but they don?t use it so I set the level to 0 and dishwasher is running without issues. I also fixed the mounting for them and put kick plate on.
We serviced a
LG dishwasher
Near Macedon, NY 14502
Tina
Job Details:
12/02/2024
Called and talked to customer and it?s been working fine since after he called and he ran a load without issues.
We serviced a
whirlpool dryer
Near Penfield, NY 14526
Tina
Job Details:
12/02/2024
Dryer would run but it sounded like something was stuck in blower house or motor somI took apart and moved motor by hand and I felt resistance then all of a sudden it started moving without issues and 8 turned dryer on and the sound went away. I talked to customer and she decided to installed a new maintenance kit and I cleaned the inside of dryer and motor off also gave her the number to the venting company to get new vents installed for the dryer.
Once back together dryer is running without issues.
We serviced a
Whirlpool Washer
Near Spencerport, NY 14559
JK
Job Details:
12/02/2024
Motor coupling stripped and rounded shaft on motor coupling and motor will need to be replaced.
Motor bad out of box and will have to reorder.
12-02-24:Replaced motor with coupling ran and tested all and all is running good.
We serviced a
ge Washer/Dryer All in one
Near Rochester, NY 14618
Jose R
Job Details:
12/02/2024
Cx had a giant hair ball stuck in the drain pump not allowing the unit to drain Cx had a washer dryer combo which took longer to disassemble went ahead and remove blockage now unit is operating with in specs complete
We serviced a
Ge refrigerator
Near Rochester, NY 14626
Jose R
Job Details:
12/02/2024
Cx damper was was not closing properly went ahead and made adjustment on it now when opening and closing it?s operating with in specs inform Cx to monitor unit
We serviced a
GE WAsher
Near Canandaigua, NY 14424
Derek
Job Details:
12/02/2024
Main board replacement. Unit stuck on cycle and wouldn?t complete. 137208014NH Is the main board part number if it keeps acting up new can preorder this and return. Goin to be $420.00 to repair.
We serviced a
GE Dryer
Near Canandaigua, NY 14424
Derek
Job Details:
12/02/2024
Frigidaire dryer not ge. Low heat is cycling between80 & 145 degrees which is normal range. Normal dry cycle is running between 115 & 180 degrees. High heat is cycling between 130 & 205 degrees which is normal. The heat is turning off and on like it should. It?s cycling like it should. Of the dryer was over heating it would blow the thermal fuse and there would be no heat at all. I cleaned out the lint screen with warm soapy water it had a film on the screen from dryer sheets and that will restrict air flow for the dryer.
We serviced a
Maytag Washer
Near Rochester, NY 14622
Jose R
Job Details:
12/02/2024
Cx unit is spitting a error code for not detecting how much water is in the tub Cx will need main board
We serviced a
Whirlpool Refrigerator
Near Rochester, NY 14604
JK
Job Details:
12/02/2024
Evap fan burnt out and will need to be replaced.
We serviced a
Ge dishwasher
Near Macedon, NY 14502
Jose R
Job Details:
11/29/2024
Cx has infestation everywhere I believe the mice caused the breaker to trip was able to get it back on and run but when running it seen leaks coming from the sump Cx will start exploring there options on a new unit complete
We serviced a
Whirlpool Dryer
Near Rochester, NY 14610
Jose D
Job Details:
11/29/2024
No heat on site. The heating element is damaged and will need to be replaced. I repalced the heating element, ran and tested, the dryer now has heat and is working properly. Also cleaned the dryer vents, since they visibly had a lot of lint inside, with a weak air flow. The dryer vent is now clean with a stronger air flow.
We serviced a
GE Dryer
Near Rochester, NY 14618
Cristian
Job Details:
11/29/2024
Replace Dryer belt # and cleaned inside dryer tested unit working normal .
We serviced a
maytag washer
Near Pittsford, NY 14534
Jose R
Job Details:
11/29/2024
Replaced wire harness ran multiple cycles to make sure everything mechanical is opera with in specs and everything passed inform Cx to monitor unit and educate us on how it goes
We serviced a
LG Washer
Near Rochester, NY 14616
Tina
Job Details:
11/29/2024
When you turned washer on and water started it would not even fill the machine it was just pour out all over the floor. This is usually a 2 man job due tot being a wash tower with a front load washer. I was able to tower out enough to tilt back and reconnect hose from the bottom and washer is now working without issue.
We serviced a
Ge Dryer
Near Rochester, NY 14626
JK
Job Details:
11/29/2024
Dryer belt broken changed as a kit vacuumed inside all is clean and running good.
We serviced a
Maytag Washer
Near Farmington, NY 14425
Tina
Job Details:
11/29/2024
Lid lock won?t stop flashing, they were able to unplug it a few times and would get it to work again but that stopped working for them. I put in diagnostic mode and there were 3 errors, lid lock, stuck key and main control fault. A new control board and new lid lock were needed. Customer declined repair due to cost and washer being 10 years old and they are going to get a new one.
We serviced a
Whilrpool Range
Near Rochester, NY 14625
Tina
Job Details:
11/29/2024
Oven was not getting past 100? when turned on, I tested igniter and it was only getting 2.5 AMPS so a new one was installed and it?s getting 3.3 APMS and the oven is heating without issues.
We serviced a
Ge Dishwasher
Near Webster, NY 14580
Cristian
Job Details:
11/29/2024
Replace wash motor assembly tested unit no leaks
We serviced a
GE Oven
Near Rochester, NY 14616
Jose D
Job Details:
11/29/2024
No heat on site for bake. The igniter is not getting an amperage reading, but has the correct voltage going to it. The igniter will need to be replaced. I replaced the igniter, ran and tested, the oven now has heat and is working properly. The oven preheated in 10 minutes.
We serviced a
Maytag Washer
Near Fairport, NY 14450
Jose R
Job Details:
11/29/2024
Cx unit was old that all of the parts were unavailable to order and discontinued everything is working with in specs inform them to monitor unit the unit and if it gets any worse it will be time to start exploring on a new unit
We serviced a
Whirlpool Dryer
Near Greece, NY 14616
JK
Job Details:
11/29/2024
High limit bad replaced as kit ran and tested all and all is running and heating good.
We serviced a
amana dyrer
Near Irondequoit, NY 14609
Jose D
Job Details:
11/29/2024
The Dryer is making a noise on site. The idler, belt, and supporter wheel will need to be replaced. I repaired the issue with the dryer maintenance kit. Ran and tested, the dryer no longer makes the noise and is working properly.
We serviced a
Whirlpool Washer
Near Churchville, NY 14428
JK
Job Details:
11/29/2024
PO: 8508
Ran washer through service mode, all test check good, only stored error code is out of balance, cleared codes ran and tested and all is working good.
We serviced a
Samsung refrigerator
Near Webster, NY 14580
Cristian
Job Details:
11/29/2024
Replace compressor fan motor tested unit working normal now
Wait 24 hours for proper cooling
We serviced a
Whirlpool Refrigerator
Near Pittsford, NY 14534
JK
Job Details:
11/29/2024
Icemaker motor bad and will need icemaker only just icemaker not kit.
We serviced a
Samsung refrigerator
Near Rochester, NY 14624
JK
Job Details:
11/29/2024
Refrigerator evap cover frozen over and will need to be replaced along with the temp sensor.
We serviced a
Ge dishwasher
Near Rochester, NY 14615
JK
Job Details:
11/29/2024
Diverter hose blown and will need new Diverter due to previous repairs customer will replace dishwasher.
We serviced a
Samsung Range
Near Fairport, NY 14450
Jose D
Job Details:
11/29/2024
Bake is not working on the oven on site. The igniter is not giving an amperage reading, but is getting the correct voltage. The igniter is faulty and will need to be replaced. I replaced the igniter, ran and tested, the oven now turns on, and is working properly. The oven preheated in 8 minutes.
We serviced a
Whirlpool Washer
Near East Rochester, NY 14445
Jose R
Job Details:
11/29/2024
inner and outer drum are coming apart so a new washer is needed
We serviced a
Frigidiare Oven
Near Farmington, NY 14425
Tina
Job Details:
11/29/2024
Upper oven was not heating. I tested igniter and it only had 2.54 AMPS, a new igniter was installed and it has 3.7 AMPS and oven preheated without issues.
Customer had ignited
We serviced a
Whirlpool Washer
Near Rochester, NY 14616
Jose D
Job Details:
11/27/2024
The washer won't enter a spin cycle on site, only the agitator is spinning. The washer drive block hub is stripped and will need to be replaced. I replaced the drive block, ran and tested, the washer now spins and is working properly. The washer completed the calibration test, and the diagnostic test, with no issues.
We serviced a
Maytag Dryer
Near Penfield, NY 14526
Chris
Job Details:
11/27/2024
Cleaned and repaired small section of vent only and vent is clear
We serviced a
GE refrigerator
Near Webster, NY 14580
Chris
Job Details:
11/27/2024
Replaced faulty icemaker water inlet solenoid and verified fill may take up to 24 hours to start ice production
We serviced a
Whirlpool WAsher
Near Fairport, NY 14450
Jose R
Job Details:
11/27/2024
The washer was in a flood safe mode. Therefore it was draining non stop with the door locked. I let the washer complete the flood safe mode. Ran and tested the washer to make sure it draining properly, and made sure it finished the spin cycle with towels inside. More then likely the washer has an unbalancing issue. Advised to call back if the issue happens again.
We serviced a
ge refrigerator
Near Webster, NY 14580
Cristian
Job Details:
11/27/2024
Did a software update and cleaned out drain plug that was causing freezer door to stick to frame now freezer door opens normal
We serviced a
Whirlpool Dryer
Near Pittsford, NY 14534
Tina
Job Details:
11/27/2024
Dryer won?t spin and there is a burning smell. I took dryer apart and the rollers are bad, the felt on the rear of drum is dried out and cracking and the motor won?t turn so I took back off to see if the blower wheel had something stuck in it and it did not so the motor has seized up. All above parts are needed. Landlord lives in the state of Washington so I left a message and sent over an estimate to fix. Tenant signed for card that was on file.
We serviced a
LG Dryer
Near West Henrietta, NY 14586
Jose R
Job Details:
11/27/2024
Cx has a bad control board and will be exploring there options on a new unit complete
We serviced a
KEnmore Dryer
Near Rochester, NY 14618
Jose R
Job Details:
11/27/2024
Cx unit was not heating up when diagnosing unit seen that there was a bad heating element went ahead and replaced element unit now is operating with in specs complete
We serviced a
Kitchenaid Dishwasher
Near Canandaigua, NY 14424
Derek
Job Details:
11/27/2024
Needs a new door tub gasket it also needs a new a float gasket as well
We serviced a
Jenn-Air Range
Near Pittsford, NY 14534
Jose D
Job Details:
11/27/2024
The front left burner doesn't not always light up right away. The electrode will need to be replaced. I repalced the electrode, ran and tested, the stove burners now turns on right away, and is working properly.
We serviced a
kitchen aid Dishwasher
Near Pittsford, NY 14534
Tina
Job Details:
11/27/2024
Clean and pro wash light won?t turn off, turned power off for about 5 min and when turned back on the clean light went off but prowash stayed lit and the drain pump ran for about 2 min then shut off and it would not do anything else. I tested board and it was getting 120VAC and UI was getting 5VDC tested other components and they tested good. Let customer know it seems like a communication issues and the UI and board were needed. Due to this being 10 years old customer is going to get a new appliance.
We serviced a
GE Washer
Near Rochester, NY 14612
Cristian
Job Details:
11/27/2024
Customer declined washer repair and I adjust the hinge on the door for fridge all set
We serviced a
Samsung Dryer
Near Rochester, NY 14626
Jose D
Job Details:
11/27/2024
The dryer fuses and flame sensor all check out to be good. The igniter amperage is reading 3.8 which is good. The dryer will initially get a flame from the start, but no voltage is being sent to the igniter after the first flame. The main board is faulty and will need to be replaced, possible board relay issue. I would recommend to come back with the main board and motor to be on the safe side.
We serviced a
Maytag Washer
Near Greece, NY 14612
Jose D
Job Details:
11/27/2024
I replaced the agitator, ran and tested, the agitator is now working properly. The washer went through the calibration test, and diagnostic test with no issues.
We serviced a
Jenn air Oven
Near Rochester, NY 14612
Cristian
Job Details:
11/27/2024
Will recommend control board. Customer will think about the repair.
We serviced a
Jenn air Oven
Near Ontario, NY 14519
Chris
Job Details:
11/27/2024
Self clean parts are NLA and we are unable to repair self clean functions -
Replaced front right electronic burner controller and burner is now operational
We serviced a
GE Washer
Near Williamson, NY 14589
Chris
Job Details:
11/27/2024
Replaced lock assembly and checks ok
We serviced a
Ge dishwasher
Near Canandaigua, NY 14424
Derek
Job Details:
11/27/2024
I replaced the door gasket and tested. I don?t see any leaks after 20 min of running the dishwasher.