We serviced a
frigidaire refrigerator
Near Rochester, New York 14619
Jose R
Job Details:
07/11/2025
Cx had a bad compressor it?s not running so the unit will not cool Cx will have to get in contact with manufacturer to see if there is anything they can do
We serviced a
Maytag dishwasher
Near Rochester, New York 14623
Jose R
Job Details:
07/11/2025
Cx has a bad circulation motor and will need sump to be replaced if wanting to go along with any repair
We serviced a
Whirlpool Refrigerator
Near Rochester, New York 14604
Jose R
Job Details:
07/11/2025
Cx need filter with chip so it can read that it?s active
We serviced a
Whirlpool Oven
Near Webster, New York 14580
Chris
Job Details:
07/11/2025
Replaced faulty oven igniter and checks ok- customer is using a spill protector but does not appear to be blocking vents
We serviced a
Whirlpool Oven
Near Webster, New York 14580
Cristian
Job Details:
07/11/2025
Replaced dsi control
We serviced a
Samsung Washer
Near Fairport, New York 14450
Cristian
Job Details:
07/11/2025
Replace dispenser hose tested unit no leaks
We serviced a
GE oven
Near Canandaigua, New York 14424
Derek
Job Details:
07/10/2025
I replaced the inner double pane glass on the oven.
We serviced a
Whirlpool Refrigerator
Near Rochester, New York 14604
JK
Job Details:
07/10/2025
All parts that are needed are NLA for this machine, ran temperature check and all temperatures are running within range.
We serviced a
LG microwave
Near Fairport, New York 14450
Derek
Job Details:
07/10/2025
Needs door harness it keeps glitching out. Ran and tested it?s working good.
We serviced a
Samsung dryer/washer
Near Rochester, New York 14612
Dennis
Job Details:
07/10/2025
Found dryer blower wheel had lint lodged on one side of the wheel. Cleaned and reassembled the dryer. Working properly now. Customer didn?t want the washer looked at.
We serviced a
LG Microwave
Near Fairport, New York 14450
Derek
Job Details:
07/10/2025
I installed the new microwave and tested. It?s working good.
We serviced a
GE refrigerator
Near Rochester, New York 14607
Cristian
Job Details:
07/10/2025
fan will not run ordering motor. Customer paid in full
We serviced a
lg Refrigerator
Near Henrietta, New York 14467
Jose D
Job Details:
07/10/2025
I repalced the main board on site, and now the refrigerator has power. The fridge also cooled down by 20 degrees in 15 minutes. Advised to give the fridge 24 hours to reach it's set tempatures.
We serviced a
Ge washer
Near Rochester, New York 14617
Dennis
Job Details:
07/10/2025
Washer is 12 years old and has several issues. Suspension rods are bad and has a bad gearcase and water leaking from the washtub. Customer declined the repair.
We serviced a
Whirlpool washer
Near Fairport, New York 14450
Jose D
Job Details:
07/10/2025
The washer gave a suds and no fill/long fill error code. I checked all the wiring, the water inlet filters, the pressure hose, and then ran a full quick wash cycle. The washer finished the quick wash cycle with no issues. Advised to call back if the issue happends again.
We serviced a
Ge dryer
Near Rochester, New York 14605
Jose D
Job Details:
07/10/2025
The dryer has an object stuck near the blower wheel. I removed the object, ran and tested, the dryer is now working properly. I also vacuumed lint within the dryer.
We serviced a
Whirlpool Refrigertaor
Near Rochester, New York 14612
JK
Job Details:
07/10/2025
Jazz board getting stuck in defrost mode replaced ran and tested all is running and working good.
We serviced a
Ge dryer
Near Fairport, New York 14450
Ray
Job Details:
07/10/2025
Replaced knob, verified that it was aligned with number on control panel.
We serviced a
Frigidaire refrigerator
Near Grandyle Village, New York 14072
Tina
Job Details:
07/10/2025
Arrived at customer home for ice maker not working found water line not connected reconnected water line test unit getting water advised customer to let unit run for ice products and call back if the unit is not producing ice the unit has water.
We serviced a
Kenmore oven
Near Rochester, New York 14606
JK
Job Details:
07/10/2025
Igniter bad replaced ran and tested all is working good, informed customer that the wires in unit are getting very brittle due to age and suggest replacing unit in the short future
We serviced a
Maytag washer
Near Niagara Falls, New York 14305
Tina
Job Details:
07/10/2025
Reinstalled agitator and tested, working without issues
We serviced a
LG Dryer
Near Henrietta, New York 14467
Ray
Job Details:
07/10/2025
Unit not heating. Igniter was cracked. Replaced igniter, tested for spin and heat, all operations normal.
We serviced a
Samsung refrigerator
Near Rochester, New York 14610
Jose R
Job Details:
07/10/2025
Cx has a compressor issue not getting a full frost pattern Cx will have to start exploring there options on a new unit
We serviced a
Ge refrigerator
Near Pittsford, New York 14534
JK
Job Details:
07/10/2025
No water line installed to unit, will need a special drill bit to get through tile flooring to beable to install.
07-10-25: Replaced water tank ran and tested all and all is running and leak free cycled icemaker all is running good.
We serviced a
Bosch Dishwasher
Near Rochester, New York 14618
Cristian
Job Details:
07/10/2025
Replaced leaking inlet valve
We serviced a
GE Dryer
Near Victor, New York 14564
Derek
Job Details:
07/10/2025
I replaced the broken belt and the two green glides for the upper bearing. The belt was broken causing the dryer to not run. The green glides weee worn and almost into the plastic bearing housing. I vacuumed out the dryer lint.
We serviced a
samsung refrigerator
Near Pittsford, New York 14534
Cristian
Job Details:
07/10/2025
Icemaker housing is deformed and will not accept a new ice maker. Unable to repair.
We serviced a
Samsung Oven
Near Rochester, New York 14625
Sam
Job Details:
07/10/2025
Customer states intermittently no heat, sometimes not at all. Found weak igniter, and rodents chewed main wire harness. Needs main wire harness and igniter, advised customer I could not warranty job due to rodent damage. Advised customer not to use unit due to possible fire hazard
We serviced a
speed queen dryer
Near Fairport, New York 14450
Jose D
Job Details:
07/10/2025
The heating element failed the continuity test. The heating element will need to be replaced. I replaced the heating element, ran and tested, the dryer now has heat and is working properly. I replaced the warped venting.
We serviced a
LG refrigerator
Near Irondequoit, New York 14617
Jose R
Job Details:
07/10/2025
Cx did not have filter tightened all the way
We serviced a
Samsung Refrigerator
Near Pittsford, New York 14534
Sam
Job Details:
07/10/2025
Customer states no cool refrigerator. Verified. Defrosted, installed upgraded defrost leak kit. Updated defrost cycle to 1 17.
We serviced a
Frigidaire refrigerator
Near Rochester, New York 14617
Jose D
Job Details:
07/10/2025
The customer stated the ice maker production is slow. The coils in the freezer are showing a clear sign of a seal system issue. Only one third of the coils are frosted over. Advised if he wants this to be repaired, he will have to call fridgidaire.
We serviced a
Speed Queen Dryer
Near Honeoye Falls, New York 14472
Ray
Job Details:
07/10/2025
Must run extra cycles in to heat properly. Checked thermostats and heating element, operating normal. Cleaned out entire vent run and ensured that unit tumbled and heated correctly.
We serviced a
LG dishwasher
Near Irondequoit, New York 14617
Jose R
Job Details:
07/10/2025
Was left alone at the home will need to reach out to Cx to take payment.cx unit had no power went ahead and did a soft reset on the display and got the unit to turn back on if issue comes back again would recommend control panel assembly
We serviced a
Bosch dishwasher
Near Spencerport, New York 14559
Dennis
Job Details:
07/10/2025
Dishwasher seems to be working fine. All error codes point to water filling issues and a leak. It?s filling and running fine without any leaks. Filled and drained it 4/5 times without any issues. It?s been running constantly for at least 20 minutes perfectly fine.
We serviced a
Frigidaire refrigerator
Near Rochester, New York 14623
Cristian
Job Details:
07/10/2025
Replaced filter inlet tube.
We serviced a
Bosch and LG refrigerator x2
Near Fairport, New York 14450
Sam
Job Details:
07/10/2025
Customer states items melting and refreezing Bosch refrigerator, LG lost cooling in freezer for 1 day and has been working since. Cleared ice in floor of Bosch freezer, advised customer to keep an eye on unit as it may have defrost system issue.
We serviced a
ge cooktop
Near Irondequoit, New York 14622
Cristian
Job Details:
07/10/2025
Installed cooktop
We serviced a
Frigidaire refrigerator
Near Rochester, New York 14623
JK
Job Details:
07/10/2025
Auger out of allianment adjusted all is dispensing and working good.
We serviced a
Kenmore dryer
Near Buffalo, New York 14210
Tina
Job Details:
07/10/2025
found units motor and blower wheel very squeaky Removed drum and pulleys to test motors operation advised customer on repairs he refused repairs and replace unit
We serviced a
GE Refrigerator
Near Fairport, New York 14450
Sam
Job Details:
07/10/2025
Customer states ref leaking. Verified. Found leaking from seam in cabinet. Issue is irreparable,customer will shop for new unit.
Performed dryer vent cleaning
We serviced a
GE, Maytag dryer, diswasher
Near Rochester, New York 14618
Dennis
Job Details:
07/10/2025
Dryer has a broken belt. Will need to be replaced. Tightened handle down on oven door. Dryer belt has been replaced. Dryer is working properly now.
We serviced a
GE Front Load Washer
Near Rochester, New York 14611
Ray
Job Details:
07/09/2025
washer was not draining all the water out. i put in service mode and it completed but water was still in tub. i drained water out then removed filter and it was fully clogged (see pics) so that was emptied and cleaned the out back in and a quick wash was ran and washer is now working without issues
We serviced a
frigidaire oven
Near Hilton, New York 14468
JK
Job Details:
07/09/2025
Water line frozen in door - cleared frozen line if problem persists will need new freezer door if available
We serviced a
Frigidaire refrigerator
Near Sodus, New York 14551
Chris
Job Details:
07/09/2025
Icemaker would not advance when ice was frozen in mold - replaced icemaker and verified harvest- may take up to 24 hours to resume normal ice production
We serviced a
Whirlpool microwave
Near Pittsford, New York 14534
Derek
Job Details:
07/09/2025
The fridge was running when I was there. I swapped the main control board and it stopped working and all I had was 888 888 from the ui. I then swapped out the ui control and it still didn?t work or run. So I swapped out the new control board for the old one and left the new ui in. Not all the controls were working and when you push on freezer temp up it opens the dampener door for the ice cubes. I flip flopped boards and ended up putting the old ones back in. When I left the fridge was running but the ui had pe 0000 programming mode flashing on the screen. I tried programming the unit but it won?t let me and only fridge up and down work on the ui. So I left it like that because it was at least running. I checked the part numbers for the parts and they match the ones for the fridge. I was able to get the new board and ui to work and the fridge is up and running.
We serviced a
Maytag washer
Near Greece, New York 14616
Dennis
Job Details:
07/09/2025
Washer has a bad drain pump and a bad relay on the control board. Both need to be replaced.
We serviced a
Kitchenaid dishwasher
Near Webster, New York 14580
Chris
Job Details:
07/09/2025
Customer states ice not dispensing, buzzing noise. Verified. Found faulty ice route and auger motor. Customer declined repairs due to price of repair
We serviced a
Samsung Refrigderator
Near Rochester, New York 14612
Jose R
Job Details:
07/09/2025
The plastic where the screws hold the main board in place are broken..the main board will need to be replaced.
We serviced a
Hot Pointe Washer
Near East Rochester, New York 14445
Ray
Job Details:
07/09/2025
Ribbon cable miscommunication and corroded and will need to be replaced.
07-08-25: Replaced UI ribbon cable ran through service mode and all is working good no fault codes detected.
We serviced a
Kitchenaid Dishwasher
Near Penfield, New York 14526
Cristian
Job Details:
07/09/2025
Replaced agitator dogs and harness connector. Reinstalled original drain pump. Tested, unit filled, agitated, drained and spun with no issue, operating normal.
We serviced a
Maytag dryer
Near Buffalo, New York 14225
Tina
Job Details:
07/09/2025
We serviced a
Maytag Dryer
Near Buffalo, New York 14225
Tina
Job Details:
07/09/2025
Customer states leaking. Verified. Found 3 way inlet valve cracked. Will need inlet valve.
We serviced a
Frigidaire refrigerator
Near Webster, New York 14580
Chris
Job Details:
07/09/2025
Unable to duplicate, by customer description of issue would appear to be gear case issue.
Would recommend rebuild of driveline and lower harness update - no repair at this time.
Estimate would be approx 550.00 plus tax / shipping due on return
We serviced a
Whirlpool Dryer
Near Cheektowaga, New York 14225
Tina
Job Details:
07/09/2025
ice maker is working but ice is clumping together and freeze at bottom of ice box so nothing will dispense. customer already had all the ice removed and he had the flapper for the fridge because he just had the same issue at his house in FL so bought it incase but i tested flapper and it?s sealing well and i put flashing in dispensing area and closed door and no light was shining through so seal is good. when i put in test mode the water was splashing out when it was filling so i removed ice maker and the inlet tube was covered in calcium deposits so i cleaned it off then put in test mode and no more water splashed out. the issue appears that when the IM was filling water was splashing out into ice bucket and causing ice cubes to freeze together and block chute.
let customer know if it does continue to happen the trip fee is good for 90 days and i can always come back and install the flapper and he would just pay the difference in the labor cost. also let him know if that does get installed there is no warranty with it since he bought it on his own
We serviced a
GE refrigerator
Near Irondequoit, New York 14609
Jose D
Job Details:
07/09/2025
Unit evap is frozen over and not going into defrost mode unit will need defrost control and thermistor. Unit needs to be unplugged 24 hours prior to service.
We serviced a
Whirlpool dishwasher
Near Rochester, New York 14609
Jose D
Job Details:
07/09/2025
Reinstalled lower spray arm
Recommending customer contact Samsung to source parts for the rang
We serviced a
LG dryer
Near Rochester, New York 14623
Jose D
Job Details:
07/09/2025
Freezer cold control also bad replaced ran and tested all and all is working good.
We serviced a
LG dishwasher
Near Fairport, New York 14450
Cristian
Job Details:
07/09/2025
Replaced heating element and verified operation- vent is 2nd floor / roof exit would recommend customer have vent inspected by vent wizard or contractor
We serviced a
Whirlpool dryer
Near Rochester, New York 14616
Dennis
Job Details:
07/09/2025
All paid just change the arm for the upper rack I changed the broken arm on the rack and it works good.
We serviced a
Samsung Washer
Near Rochester, New York 14618
Dennis
Job Details:
07/09/2025
Dryer needs a maintenance kit. It has wheels that don?t rotate freely. While disasembling the dryer I noticed there were several screws missing and the ones that held the dryer lid on, one was stripped.
We serviced a
Samsung Washer
Near East Amherst, New York 14051
Sam
Job Details:
07/09/2025
Customer had some floor damage that she suspected was from the dishwasher. I can?t duplicate any leaks. I believe it was a leaking garbage can that sits directly above the damage on the floor.
We serviced a
Kenmore washer
Near Rochester, New York 14624
JK
Job Details:
07/09/2025
Replaced seized evaporator fan motor
We serviced a
Samsung Dishwasher
Near Rochester, New York 14626
Jose D
Job Details:
07/09/2025
We serviced a
Samsung Oven
Near Rochester, New York 14612
Dennis
Job Details:
07/09/2025
Installed pedestals to gas dryer and washer. Had to completely uninstall dryer and move in order to install pedestals. Vent is extremely long run and not safe without booster fans.
We serviced a
Kenmore Refrigerator
Near Penfield, New York 14526
Cristian
Job Details:
07/09/2025
Dishwasher console binds on cabinetry causing it to leak from door. The customer is going to adjust cabinetry to gain clearance.
We serviced a
Whirlpool Washer
Near Pittsford, New York 14534
Jose R
Job Details:
07/09/2025
Estimate for a new control board. The washer doesn?t always want to spin or agitate even with the new shifter. It?s doesn?t recognize when it?s shifting and to what position. It doesn?t always go into the proper wash mode on the dial. Going to be roughly $500 more to fix. Washer had shifter error code when I was initially there. It wasn?t shifting at all. WH16X27251 & WH12X27187are needed to repair. Now it shifts but the computer doesn?t recognize what position it is in.
We serviced a
GE Washer
Near Pittsford, New York 14534
Ray
Job Details:
07/09/2025
We serviced a
Samsung oven
Near Churchville, New York 14428
JK
Job Details:
07/09/2025
We serviced a
Samsung oven
Near Rochester, New York 14624
JK
Job Details:
07/09/2025
Repaired freezer door switch contacts and removed ice build up from the freezer and evaporator drain pan. Cleaned debris from drain tube
We serviced a
Samsung refrigerator
Near Depew, New York 14043
Sam
Job Details:
07/09/2025
Repositioned out of balanced drum and leveled machine
We serviced a
GE Refrigerator
Near Penfield, New York 14526
Cristian
Job Details:
07/09/2025
E15 error code on site. Leakage sensor. Some water in the leakage sensor area. I removed the water and ran a cycle while observing where the leak might be coming from. I did not find any leaks while running a cycle, I also didn't find any leaks while draining the dishwasher multiple times. Advised to run a full cycle and to call back if the issue happends again.
We serviced a
Kitchenaid dishwasher
Near Mendon, New York 14506
Ray
Job Details:
07/09/2025
We serviced a
Samsung Washer
Near Macedon, New York 14502
Derek
Job Details:
07/09/2025
Loud grinding noise during cycle. Gear case covered in oil. Will need gear case, suspension rods and other assorted parts to fix. Customer will not proceed with repair.
We serviced a
Samsung Microwave
Near Rochester, New York 14612
Cristian
Job Details:
07/09/2025
We serviced a
Amana washer
Near Buffalo, New York 14223
Sam
Job Details:
07/09/2025
Cx has a bad bower wheel and also shaft on motor is damaged as well Cx will have to start exploring there options on a new unit
We serviced a
Whirlpool refrigerator
Near Williamson, New York 14589
Chris
Job Details:
07/09/2025
FF door hinge dropper down and allowing humidity to enter cabinet, was able to adjust hinge back to proper place but will need bushings to fully seal door.
We serviced a
Samsung refrigerator
Near Hamburg, New York 14075
Tina
Job Details:
07/09/2025
Garbage disposal is damaged and is leaking on site. The garbage disposal will need to be replaced. I replaced the garbage disposal, ran and tested, everything is working properly now.
We serviced a
Jenn air oven
Near Rochester, New York 14620
Jose R
Job Details:
07/09/2025
We serviced a
Samsung dishwasher
Near Webster, New York 14580
Chris
Job Details:
07/09/2025
Parts for the wall oven are NLA. The freezer drain is clogged, therefore water is spilling over on the bottom of the freezer. I cleared the drain with a steamer, and ran a hot cup of hot water down the drain. Also unclogged the drain hose. Water is now draining properly.
We serviced a
Bosch Dishwasher
Near Rochester, New York 14618
Ray
Job Details:
07/09/2025
Customer states no cool. Verified. 4 blinks on the inverter. Unit has bad compressor. Repair is not economical, customer will shop for new unit
We serviced a
GE dryer
Near Webster, New York 14580
Chris
Job Details:
07/09/2025
It has a sealed system issue there?s little to no frost on the evap. The freezer is like warm and the fridge is barely holding temp. The compressor is running. They?re calling whirlpool they?re less than 5yrs old.
We serviced a
Maytag Dryer
Near Penfield, New York 14526
Cristian
Job Details:
07/09/2025
Customer has an almost 40 year old washer that wasn?t draining. There were a few issues aside from that that. Customer declined the repair.
We serviced a
Maytag washer
Near Victor, New York 14564
Derek
Job Details:
07/09/2025
We serviced a
Unknown brand dryer
Near Rochester, New York 14618
Dennis
Job Details:
07/09/2025
Replaced seized evaporator fan motor
We serviced a
Frigidaire Refrigerator
Near Niagara Falls, New York 14304
Tina
Job Details:
07/09/2025
Unit not draining. Excess debris found in drain pump. Cleaned out drain pump, hoses and gasket. Tested, drain pump operation normal and no leakage.
We serviced a
Frigidaire Oven
Near Fairport, New York 14450
Derek
Job Details:
07/09/2025
Cx had a bad igniter was not providing proper voltage and taking forever to pre heat and hit temp went ahead and replaced igniter now unit is operating with in specs complete
We serviced a
Kenmore Washer
Near Buffalo, New York 14207
Tina
Job Details:
07/09/2025
We serviced a
Kenmore Refrigerator
Near Hamburg, New York 14075
Tina
Job Details:
07/09/2025
Unit appears to be working properly on today?s visit - possible inlet valve is sticking open but that is only my best guess , no guarantees
Estimate is approx 140.00 plus tax due on return to replace inlet - no repair at this time
We serviced a
Kitchen aid oven
Near Pittsford, New York 14534
Derek
Job Details:
07/09/2025
Replaced bake element and verified heat
We serviced a
GE Washer
Near Tonawanda, New York 14150
Sam
Job Details:
07/09/2025
installed lid lock assy and then tested washer on a speed wash and it completely without issues
We serviced a
GE Refrigerator
Near Webster, New York 14580
Chris
Job Details:
07/09/2025
Cx has a bad fan motor causing the unit to make high pitch sound and also a thumping noise went ahead and replaced fan motor now unit is operating with in specs complete
We serviced a
Whirlpool, Frigidaire oven, refrigerator
Near Rochester, New York 14624
Jose D
Job Details:
07/08/2025
Parts for the wall oven are NLA. The freezer drain is clogged, therefore water is spilling over on the bottom of the freezer. I cleared the drain with a steamer, and ran a hot cup of hot water down the drain. Also unclogged the drain hose. Water is now draining properly.
We serviced a
Hot Point Refrigerator
Near Rochester, New York 14626
Cristian
Job Details:
07/08/2025
Replaced seized evaporator fan motor
We serviced a
unknown brand oven
Near Rochester, New York 14625
Jose R
Job Details:
07/08/2025
Cx had a bad igniter was not providing proper voltage and taking forever to pre heat and hit temp went ahead and replaced igniter now unit is operating with in specs complete
We serviced a
Frigidaire Refrigerator
Near Hilton, New York 14468
JK
Job Details:
07/08/2025
Freezer cold control also bad replaced ran and tested all and all is working good.
We serviced a
Ge washer
Near Pittsford, New York 14534
Ray
Job Details:
07/08/2025
Unit not draining. Excess debris found in drain pump. Cleaned out drain pump, hoses and gasket. Tested, drain pump operation normal and no leakage.
We serviced a
Kenmore Washer
Near Rochester, New York 14616
Dennis
Job Details:
07/08/2025
Customer has an almost 40 year old washer that wasn?t draining. There were a few issues aside from that that. Customer declined the repair.
We serviced a
Whirlpool Dishwasher
Near Churchville, New York 14428
Dennis
Job Details:
07/08/2025
Customer had some floor damage that she suspected was from the dishwasher. I can?t duplicate any leaks. I believe it was a leaking garbage can that sits directly above the damage on the floor.
We serviced a
Ge dryer
Near Victor, New York 14564
Derek
Job Details:
07/08/2025
Estimate for a new control board. The washer doesn?t always want to spin or agitate even with the new shifter. It?s doesn?t recognize when it?s shifting and to what position. It doesn?t always go into the proper wash mode on the dial. Going to be roughly $500 more to fix. Washer had shifter error code when I was initially there. It wasn?t shifting at all. WH16X27251 & WH12X27187are needed to repair. Now it shifts but the computer doesn?t recognize what position it is in.

