Replace ice-maker tested unit working normal now . Wait 24 hours for Icemaker to make ice

Drain hose so clogged can not get clog loose hose will need to be replaced. 05-16-24: installed new drain hose ran and tested for leaks all is leak free and draining good.

Clothing was stuck under the agitator. I removed the clothing, ran and tested, the washer now agitates and works properly.

Dryer is throwing an F3E8 error which is sensor on compressor. I tested it and it?s reading about 1200kohms but it should be reading same as other sensor which is at around 530kohms. It?s reading at a temp to high so it?s shutting down dryer after a few minutes. A new compressor sensor is needed. Also let them know that if for any reason this does not fix issues than the sensor overheating cause the board to go bad so that would also be needed but that hopefully the sensor will fix issues.

Did a short vent cleaning will need to come back and replace door seal on washer