WPW10268912 May need a water pressure sensor or new shocks. It worked fine for me both times I tried it. It had an out of balance code and a water level code.

Element tests good but only half of it lights and the high limit switch is bad. Customer will need both parts. I found the heater was cracked and one of the wires was touching the heater housing allowing it to ground out. This will keep the heater on and not allow it to shut off. This causing the high limit thermostat to pop. I replaced both the heater and the high limit. I ran and tested the dryer is working good.

Replaced the evap fan motor it wasn?t coming on. Should be cold in the fridge in the next 6hrs.

I pulled the drain pump off and cleaned the oring. There was some soap build up and calcium on it. I reassembled and tested. I didn?t see it leaking.

Drain was clogged and is leaking out the front of the freezer. It?s needing a drain hose cleaning. It also needs som defrosting.